Why do you need to- replace or repair a garage door opener

Have you ever faced the situation that your garage door opener stops its function suddenly or stops working correctly? You may wonder to know the cause of it and how to handle such an inconvenient situation! Fortunately, the professional team of garage door openers in Washington, DC, have the best answer to it. They are discerning with the fact of how irritating a non-functional garage door can be! It is very annoying, especially when your vehicle is still parked inside or about to go for any emergency or to your office. Let us discuss why you need to replace or repair a garage door opener. 

Remote control or keypad fail to operate the opener.

Do you find your wireless remote control or wall-mounted keypad suddenly stops working? Then there is a chance that you have a defect in your garage door opener. It may happen due to several possible reasons. A few of the most common ones are:

·         You are probably out of range if you’re using wireless remote control. It may happen as the opener antenna can interrupt the radio signal.

·         Antenna placement or damage is the cause of malfunctioning. So take the assistance of a garage door opener expert in Washington DC right away. They will adjust the antenna to its appropriate position and inspect if there are signs of damage.

·         Your wireless remote stops functioning due to a dead battery. Replace the battery and recheck the remote opener.

·         Improper programming of remote openers may be a reason for its improper functioning. If it did not operate after several trials, you need to contact a professional garage door opener in Washington DC who can reprogram the system.

Wall Switch won’t support the garage door opener

If you press the garage door opener’s wall switch and nothing happens, then the problem is almost always stemming from a power source disruption. Call a garage door opener expert in Washington DC to check the specific areas that cause power disconnection or tripped circuit:

·         The power outlet

·         The circuit breaker, fuse panel associated with it

·         The power cable attaches to the garage door opener 

If you can’t locate a power disruption at your power outlet or breaker box then, there’s a definite chance that the motor in your garage door opener motor might be burned out. Diagnosing a non-functional opener motor is a job of a professional that you’ll require inevitably.

Garage door will not open completely

If your garage door raises as it should but won’t open all the way, you’re likely dealing with one of the following issues:

·         Damaged rollers. If the door’s rollers are damaged, rusted, or slow-moving, they can stick, which may prevent the door from opening fully. It creates excess friction within the garage door track and confuses the opener to work correctly. 

·         The improper close-force setting also causes improper garage door opener function.   It decides the pressure necessary to close the door completely. Like a damaged roller situation, a highly sensitive close-force setting can also fool the door into reversing prematurely.

·         Up-limit switch placement. If your garage door openers up-limit switch is positioned too far away from the motor unit, the door cannot open all the way.

This issue typically presents itself immediately after your garage door installation, so if your door is older, the switch probably isn’t the problem.

Do you in need of a garage door specialist that handles the opener repair or replacement in Washington DC? Contact Washington DC Garage Door today. When you trust their team for opener repair or new installation, you’re trusting a team that genuinely values the investment you’ve made in your home. To learn more about the job services or schedule your appointment, give a call at (202)-629-9863 today!